Referinta: vcds_12_12_en

VCDS 12.12 (EN)

Recenzie(i): 0

VCDS versiunea 12.12 cu soft disponibil in limba engleza. Acest tester de diagnoza VCDS este recomandat pentru uz casnic, pe masina proprie VW, Audi, Seat sau Skoda, fabricate pana in anul 2012. Va punem la dispozitie instructiuni de instalare, manuale de codari si tutoriale de utilizare. 

Pret 149 RON
Vezi detalii
In stoc

Referinta: elm_327_bluetooth

ELM 327 Bluetooth

Recenzie(i): 0

ELM 327 Bluetooth este o interfata de diagnoza compatibila cu aproape toate modele din 1996 si pana in prezent. Merge si pe CAN-BUS.Aceasta suporta toate protocoalele OBD-II, si este expediat cu o serie de programe compatibile.

Pret 125 RON
Vezi detalii
In stoc

Referinta: elm_327_usb

ELM 327 USB

Recenzie(i): 0

ELM 327 USB este un tester de diagnoza multimarca ce poate diagnostica problemele de motor ale automobilelor.

Pret 99 RON
Vezi detalii
In stoc

Referinta: vcds_hex_v2

VCDS HEX V2

Recenzie(i): 0

Merge pe orice model de VW, Audi, Skoda Seat fabricat pana in anul 2018 inclusiv. Aceasta versiune de tester VCDS HEX-V2 este disponibila in limba engleza.

Pret 450 RON
Vezi detalii
In stoc

Referinta: obdeleven_pro

OBDeleven PRO

Recenzie(i): 0

Din motive ce tin de calitatea functiilor pe care acesta le ofera, firma noastra nu mai recomanda acest produs. Pentru a beneficia mereu de cea mai buna calitate va oferim o alternativa perfecta pentru o diagnoza avansata, gama VCDS. 

Pret 345 RON
Vezi detalii
Nu sunt suficiente produse in stoc
Toate produsele din topul vanzarilor
  • Firme de curierat

    Firme de curierat
  • Modalitati de plata

    Modalitati de plata
  • Plata in rate - card de cumparaturi

    Plata in rate - card de cumparaturi
  • Pret redus

Tester turisme + camioane Diag PRO Plus

diag_pro_plus
Rating 

MultiDiag PRO+ este un tester avansat de diagnoza auto, disponibil si in limba romana.

2.100 RON
Pret: 1.799 RON Economiseste 301 RON
Livrare 1-2 zile
Cantitate

Descriere

Bluetooth Multidiag Pro+ for Cars/Trucks and OBD2

Multidiag Pro+ Support cars, trucks and generic at the same time. Support cars and vans from 1998 onwards.With Truck software package, you are able to perform brand diagnostics for light and heavy vehicles,buses and trailers from 1995 onwards. The diagnostic program GENERIC is designed for the legislation based diagnostics, specially targeted for emission related fault codes. Support multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), RS485 (J1708), TTL and (SPI, analog in, 5volt out).

Buy it for 3 reasons:

1. Support both USB and Bluetooth connection, bluetooth distance: 2M-5M.
2. Interface support flight reco
3. Support Multi languages: English, Czech, Dansk, Dutch, Finnish, German, French, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian, Spanish, Suomi, Swedish, Turkish

Multidiag Pro+ Function:

1. MULTI COLOUR INDICATOR

With the multi colour indicator on tcscdp, you have full control of the diagnostic process. Different colors and sound communicates the status and the placement of the indicator allows you to see it from a far. For example, if the indicator alternates between blue and green the tcscdp is in communication with the vehicle control unit.

2. FLIGHT RECORDER

With the flight recorder function, you can record parameters in real time while you are driving a vehicle. During recording, you can, with a press of a button, highlight the specific error so that you can investigate the detected error at a later time.Tcscdp is equipped with built-in memory thus removing the need to bring a computer. Memory cart not include in package .

3. CONNECTOR WITH LED

To locate the diagnostic connector in the vehicle with ease, even if it’s located in a dark and inaccessible place, there is a LED on the 16-pin connector to help you along. The location and the design allows the light to function even when using the adaptor cable for vehicles without a 16-pin diagnostic socket.

4. VOLTAGE CHECK

When tcscdp is connected to the vehicle, the unit will check the battery voltage of the vehicle and automatically adjusts itself to the vehicle’s voltage level of 12 or 24 volts. If the voltage gets too high or too low, tcscdp will warn you with both sound and light and you will also be alerted through the battery icon in our diagnostic software.

5. CHASSIS NUMBER VIN

In our CARS software, we have a smart function that allows you to read out the chassis number from the vehicle that you would like to diagnose. This ensures that the right model and year is selected automatically. In addition, engine code for vehicles, which are commonly available on the markets, is also selected automatically.

6. ISS

Intelligent System Scan (ISS) scans through all the systems in the vehicle and displays the fault codes that are stored in each system. This saves time and you get a quick overview of the actual status of the entire vehicle. When the ISS is complete, you can then select a specific control system to analyse the results further on.

7. ISI

Intelligent System Identification (ISI) identifies and selects automatically the type of controller that is mounted in the vehicle. This ensures that the diagnostic session is performed correctly with the correct parameters as required.

8. REPORT FUNCTION

Under this function tab, you will be able to see the adaptations and adjustments that are possible for a specific vehicle without having the vehicle near you. Together with the help texts as a guide, you can plan and be effective in your work; even under complex situations.

9. OBD-FUNCTIONS

Multidiag Pro+ is equipped with an unique multiplexer technology, which allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, we offer a complete set of certified and customized adapter cables and kits.

10. HELP FUNCTION

For most OBD functions, such as adjustments and programmings, there are detailed instructions and help texts to assist you in your diagnosis work. You will find step by step information about prerequisites, preparation and implementation of various functions; making even the most complex function simple to perform.

Package including:

1pc x Multidiag Pro+ Interface
1pc x LED OBD2 Cable
1pc x USB Cable
1pc x Software CD

Detalii ale produsului
diag_pro_plus
Recenzii

Scrie-ti recenzia

Tester turisme + camioane Diag PRO Plus

Tester turisme + camioane Diag PRO Plus

MultiDiag PRO+ este un tester avansat de diagnoza auto, disponibil si in limba romana.

Scrie-ti recenzia
16 alte produse in aceeasi categorie:

Referinta: cat_caterpillar_et

Tester CAT Caterpillar ET

Recenzie(i): 0

Afiseaza grafice si loguri ale parametrilor.Ofera informatii despre kilometrii parcurs, combustibilul consumat si histograme.Vede diagnostice active si sterge diagnosticele salvate. Afiseaza evenimentele in care au aparut iregularitati si au fost salvate in ECU.Face calibrari pentru a imbunatati ECMCustomizeaza ECM cu setari specifice aplicatiei

Pret 2.999 RON
Vezi detalii
In stoc

Referinta: linde_canbox_usb

Linde Canbox USB

Recenzie(i): 0

Linde CanBox dealer service diagnostic tool, this tool works with the LINDE Pathfinder software which covered all LINDE CAN system forklifts models.

Pret 3.750 RON
Vezi detalii
In stoc

Referinta: xtuner_cvd

Testere camioane Xtuner CVD

Recenzie(i): 0

Xtuner CVD este un scaner auto cu bluetooth pentru vehiculele grele, camioane, SUV-uri, camioane usoare si camioane grele, functioneaza pe toate autovehiculele incepand cu anul 1996.

Pret 999 RON
Vezi detalii
In stoc

Referinta: mb_xentry_sd_c5

Mercedes Benz XENTRY SD Connect C5 Star diagnosis

Recenzie(i): 0

Interfata de diagnoza Mercedes Benz C5 Xentry SD Connect , produsa de firma franceza ACTIA este varful de gama in diagnoza computerizata pentru toata gama Mercedes putatnd fi folosita la diagnosticare, codare  adaptare si reprogramare a modulelor electronice de control cum ar fi motor, aribag, ABS, esp, transmisie, aer conditionat, confort si altele....

Pret 5.000 RON
Vezi detalii
In stoc

Referinta: delphi_ds150

Delphi DS150

Recenzie(i): 0

Testerul auto Delphi DS150 combina versatilitate si usurinta in utilizare.

Pret 1.100 RON
Vezi detalii
In stoc

Referinta: launch_x431_v_pro3

Launch X431 V+ PRO3 WifiHeavy Duty Cars + Truck

Recenzie(i): 0

Testerul de masini, camioane si autobuze Launch x431 PRO+ Heavy Duty Include toate avantajele predesorului sau X-431 Havey Duty, suporta modelele diesel dar si benzina de 12V sau 24V. Are un design ergonomic,compact si poate fi folosit cu usurinta.

Pret 12.850 RON
Vezi detalii
In stoc

Referinta: Jaltest Link

Tester camioane Jaltest Link

Recenzie(i): 0

Jaltest este un instrument utilizat pentru mai multe scopuri si este de asemenea compatibil pentru a diagnostica majoritatea sistemelor existente.

Pret 7.500 RON
Vezi detalii
In stoc

WABCO DIAGNOSTIC KIT (WDI) WABCO Trailer and Truck Diagnostic Interface

Recenzie(i): 0

Wabco Diagnostic Kit is a universal diagnostic tool designed for maintenance of trailers, trucks and buses. Wabco Diagnostic tool supports most popular and wanted diagnostic protocols for wider compatibility range. Wabco Diagnostic Kit comes with a full set of diagnostic software which allows you to connect to almost all necessary electronic, hydraulic...

Pret 2.299 RON
Vezi detalii
In stoc

Referinta: VOCOM VCADS PRO

VOCOM VCADS PRO

Recenzie(i): 0

Interfata de diagnoza VOCOM VCADS PRO este una performanta, care detine o aplicatie de diagnostic care acopera intregul proces de reparare prin utilizarea plug-in-urilor.

Pret 3.950 RON
Vezi detalii
In stoc

Referinta: NEXIQ-2 USB Link

Tester NEXIQ-2 USB Link

Recenzie(i): 0

Nexiq- 2 USB link este o interfata de diagnoza care permite citirea si recuperarea informatiilor despre vehicul utilizand fie tehnologia Bluetooth fara fir, fie conexiunea mai traditionala prin cablu.

Pret 2.300 RON
Vezi detalii
In stoc

Referinta: super_volvo_vcads

Super VOLVO VCADS

Recenzie(i): 0

Super VOLVO VCADS este o unealta profesionala de diagnoza pentru utilaje si masini grele produse de VOLVO.

Pret 6.199 RON
Vezi detalii
In stoc

Referinta: autel_maxisys_pro_ms908p

Autel MaxiSys Pro MS908P

Recenzie(i): 0

Autel MaxiSys Pro MS 908P este usor de utilizat, detine o gama larga de caracteristici care asigura o performanta optima de diagnosticare.

Pret 12.900 RON
Vezi detalii
In stoc

Urmariti-ne pe Facebook